{"title":"OneFlow (Inline) Anti-Scale Systems","description":"\u003cp\u003e\u003c\/p\u003e","products":[{"product_id":"s0002148-of110-1","title":"Watts OneFlow In Line Anti-Scale System - 1 gpm - OF110-1","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OF110-1\u003cbr\u003e• Maximum Flow Rate: 1 gpm\u003cbr\u003e• Pipe Connection Sizes: 1⁄2” FNPT\u003cbr\u003e• Dimensions: 14-1\/2\" (H) x 6-5\/8\" (W) x 5-1\/2\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Anti-Scale System\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/b\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419447169304,"sku":"S0002148 ( OF110-1 )","price":483.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/of110-1_oneflow_system_2nd.jpg?v=1751301988"},{"product_id":"s0002149-of120-2","title":"Watts OneFlow In Line Anti-Scale System - 2 gpm - OF120-2","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OF120-2\u003cbr\u003e• Maximum Flow Rate: 2 gpm\u003cbr\u003e• Pipe Connection Sizes: 1⁄2” FNPT\u003cbr\u003e• Dimensions: 24-1\/2\" (H) x 6-5\/8\" (W) x 5-1\/2\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Anti-Scale System\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/b\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419447234840,"sku":"S0002149 ( OF120-2 )","price":740.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/of120-2_oneflow_system_2nd.jpg?v=1751302000"},{"product_id":"s0002150-of140-4","title":"Watts OneFlow In Line Anti-Scale System - 4 gpm - OF140-4","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OF140-4\u003cbr\u003e• Maximum Flow Rate: 4 gpm\u003cbr\u003e• Pipe Connection Sizes: 3\/4\" FNPT\u003cbr\u003e• Dimensions: 26\" (H) x 9-13\/16\" (W) x 8-5\/8\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Anti-Scale System\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/b\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419447333144,"sku":"S0002150 ( OF140-4 )","price":1247.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/of140-4_oneflow_system_2nd.jpg?v=1751302012"},{"product_id":"s0002151-of210-1","title":"Watts OneFlow In Line - Dual Cartridge - Anti-Scale System - 1 gpm - OF210-1","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model:  OF210-1\u003cbr\u003e• Maximum Flow Rate: 1 gpm\u003cbr\u003e• Dual Cartridge System: Carbon \/ Scale Removal\u003cbr\u003e\u003cbr\u003e• Replacement Filters: OF110RC ( 5,000 Gallons) \/ OF110RM ( 1 Year )\u003cbr\u003e• Pipe Connection Sizes: 1⁄2” FNPT\u003cbr\u003e• Dimensions: 14-1\/2\" (H) x 11-1\/4\" (W) x 5-1\/2\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eOneFlow OF210-1 Dual Filtration Anti-Scale Systems\u003c\/b\u003e provides superior protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in food service applications. \u003cbr\u003eThe OneFlow system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system, or other appliance) that requires protection from the ill effects of hard water. Watts OneFlow System works exceptionally well where the water is being heated or brought to steam.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDual Cartridge In-Line Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003e• Two filter housings\u003cbr\u003e• Chemical-free, salt-free scale prevention system that helps extend life of coffee makers and other appliances while reducing energy consumption\u003cbr\u003e• Simple shutoff and filter change with inlet ball valve and filter wrench\u003cbr\u003e• Maximum flow rate: 1 gpm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReplacement Filter Cartridge Specification \u0026amp; Capacities\u003c\/b\u003e \u003cbr\u003e• OF110RC - change the cartridge at gallon rating or every 6 months, whichever comes first. \u003cbr\u003e• OF110RM - cartridge does not have a grain removal capacity, however, other contaminants present in the water will gradually degrade the effectiveness of this cartridge. Change the OF110RM cartridge at least once a year.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Dual Filtration Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System with two filter housings provides protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in Food Service applications. The OneFlow® system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system or other appliance) that requires protection from the ill effects of hard water. OneFlow® works exceptionally well where the water is being heated or brought to steam. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain, thereby having a greatly reduced ability to react negatively like dis-solved hardness does. The system requires very little maintenance, no back-washing, no salt, and no electricity. Typical hardness problems, especially build-up of scale in heating elements, boilers, and steamers, are no longer a concern. OneFlow® is not a water softener. It does not add chemicals or remove any minerals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution with chlorine reduction as a great alternative to water softening (ion exchange) or scale sequestering devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Anti-Scale Systems - Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system with added carbon filtration shall be installed on the cold water service line to condition and filter the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system with added carbon filtration may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale and taste\/odor concerns provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housings to allow the bypass of untreated water in the event that service or cartridge replacement is necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note:\u003c\/b\u003e Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems.\u003cbr\u003e\u003cb\u003eStandards:\u003c\/b\u003e Independent scientific testing has confirmed Template Assisted Crystallization (TAC) technology provides scale reduction of over 95+%. Testing was conducted under protocol based on DVGW W512 test to access control of scale formation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419447857432,"sku":"S0002151 ( OF210-1 )","price":857.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_of210-1_system_2nd.jpg?v=1751302060"},{"product_id":"s0002152-of220-2","title":"Watts OneFlow In Line - Dual Cartridge - Anti-Scale System - 2 gpm - OF220-2","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model:  OF220-2\u003cbr\u003e• Maximum Flow Rate: 2 gpm\u003cbr\u003e• Dual Cartridge System: Carbon \/ Scale Removal\u003cbr\u003e\u003cbr\u003e• Replacement Filters: OF120RC ( 30,000 Gallons) \/ OF120RM ( 1 Year )\u003cbr\u003e• Pipe Connection Sizes: 1⁄2” FNPT\u003cbr\u003e• Dimensions: 24-1\/2\" (H) x 11-1\/4\" (W) x 5-1\/2\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eOneFlow OF220-2 Dual Filtration Anti-Scale Systems\u003c\/b\u003e provides superior protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in food service applications. \u003cbr\u003eThe OneFlow system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system, or other appliance) that requires protection from the ill effects of hard water. Watts OneFlow System works exceptionally well where the water is being heated or brought to steam.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDual Cartridge In-Line Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003e• Two filter housings\u003cbr\u003e• Chemical-free, salt-free scale prevention system that helps extend life of coffee makers and other appliances while reducing energy consumption\u003cbr\u003e• Simple shutoff and filter change with inlet ball valve and filter wrench\u003cbr\u003e• Maximum flow rate: 1 gpm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReplacement Filter Cartridge Specification \u0026amp; Capacities\u003c\/b\u003e \u003cbr\u003e• OF120RC - change the cartridge at gallon rating ( 30,000 Gallons ) or every 6 months, whichever comes first. \u003cbr\u003e• OF120RM - cartridge does not have a grain removal capacity, however, other contaminants present in the water will gradually degrade the effectiveness of this cartridge. Change the OF120RM cartridge at least once a year.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Dual Filtration Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System with two filter housings provides protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in Food Service applications. The OneFlow® system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system or other appliance) that requires protection from the ill effects of hard water. OneFlow® works exceptionally well where the water is being heated or brought to steam. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain, thereby having a greatly reduced ability to react negatively like dis-solved hardness does. The system requires very little maintenance, no back-washing, no salt, and no electricity. Typical hardness problems, especially build-up of scale in heating elements, boilers, and steamers, are no longer a concern. OneFlow® is not a water softener. It does not add chemicals or remove any minerals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution with chlorine reduction as a great alternative to water softening (ion exchange) or scale sequestering devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Anti-Scale Systems - Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system with added carbon filtration shall be installed on the cold water service line to condition and filter the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system with added carbon filtration may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale and taste\/odor concerns provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housings to allow the bypass of untreated water in the event that service or cartridge replacement is necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note:\u003c\/b\u003e Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems.\u003cbr\u003e\u003cb\u003eStandards:\u003c\/b\u003e Independent scientific testing has confirmed Template Assisted Crystallization (TAC) technology provides scale reduction of over 95+%. Testing was conducted under protocol based on DVGW W512 test to access control of scale formation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419447922968,"sku":"S0002152 ( OF220-2 )","price":1273.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_of220-2_system_2nd.jpg?v=1751302077"},{"product_id":"watts-oneflow-in-line-dual-cartridge-anti-scale-system-4-gpm-of240-4","title":"Watts OneFlow In Line - Dual Cartridge - Anti-Scale System - 4 gpm - OF240-4","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OF240-4\u003cbr\u003e• Maximum Flow Rate: 4 gpm\u003cbr\u003e• Dual Cartridge System: Carbon \/ Scale Removal\u003cbr\u003e\u003cbr\u003e• Replacement Filters: OF140RC ( 65,000 Gallons) \/ OF140RM ( 1 Year )\u003cbr\u003e• Pipe Connection Sizes: 3\/4” FNPT\u003cbr\u003e• Dimensions: 26\" (H) x 17-5\/16\" (W) x 8-5\/8\" (D)\u003cbr\u003e\u003cbr\u003e\u003cdiv align=\"center\"\u003e\u003cfont color=\"red\"\u003e\u003cu\u003e\u003cb\u003e\u003ci\u003eManufacturer Production Item - Minimum 3 to 5 Weeks to Ship\u003c\/i\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/font\u003e\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eOneFlow OF240-4 Dual Filtration Anti-Scale Systems\u003c\/b\u003e provides superior protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in food service applications. \u003cbr\u003eThe OneFlow system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system, or other appliance) that requires protection from the ill effects of hard water. Watts OneFlow System works exceptionally well where the water is being heated or brought to steam.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDual Cartridge In-Line Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003e• Two filter housings\u003cbr\u003e• Chemical-free, salt-free scale prevention system that helps extend life of coffee makers and other appliances while reducing energy consumption\u003cbr\u003e• Simple shutoff and filter change with inlet ball valve and filter wrench\u003cbr\u003e• Maximum flow rate: 1 gpm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReplacement Filter Cartridge Specification \u0026amp; Capacities\u003c\/b\u003e \u003cbr\u003e• OF140RC - change the cartridge at gallon rating ( 65,000 Gallons ) or every 6 months, whichever comes first. \u003cbr\u003e• OF140RM - cartridge does not have a grain removal capacity, however, other contaminants present in the water will gradually degrade the effectiveness of this cartridge. Change the OF120RM cartridge at least once a year.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAbout Watts OneFlow Dual Filtration Anti-Scale Systems\u003c\/b\u003e\u003cbr\u003eThe OneFlow® Anti-Scale System with two filter housings provides protection from scale formation and reduces chlorine and other off tastes to improve overall water quality in Food Service applications. The OneFlow® system is a dual cartridge-based system that may be installed on a cold water line prior to a water-using device (coffee maker, espresso machine, post-mix system or other appliance) that requires protection from the ill effects of hard water. OneFlow® works exceptionally well where the water is being heated or brought to steam. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain, thereby having a greatly reduced ability to react negatively like dis-solved hardness does. The system requires very little maintenance, no back-washing, no salt, and no electricity. Typical hardness problems, especially build-up of scale in heating elements, boilers, and steamers, are no longer a concern. OneFlow® is not a water softener. It does not add chemicals or remove any minerals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution with chlorine reduction as a great alternative to water softening (ion exchange) or scale sequestering devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Anti-Scale Systems - Standard Features\u003c\/b\u003e\u003cbr\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness\u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain\u003cbr\u003e• No control valve, no electricity and no wastewater\u003cbr\u003e• Uses environmentally friendly “green” technology\u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not\u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate\u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes\u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health\u003cbr\u003e• OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOneFlow Standard Specifications\u003c\/b\u003e\u003cbr\u003eA OneFlow® scale prevention system with added carbon filtration shall be installed on the cold water service line to condition and filter the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system with added carbon filtration may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale and taste\/odor concerns provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housings to allow the bypass of untreated water in the event that service or cartridge replacement is necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Note:\u003c\/b\u003e Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems.\u003cbr\u003e\u003cb\u003eStandards:\u003c\/b\u003e Independent scientific testing has confirmed Template Assisted Crystallization (TAC) technology provides scale reduction of over 95+%. Testing was conducted under protocol based on DVGW W512 test to access control of scale formation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/b\u003e\u003cbr\u003e• pH Levels - 6.5-8.5\u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3)\u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar)\u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C)\u003cbr\u003e• Free Chlorine  - \u0026lt; 2 ppm\u003cbr\u003e• Iron (maximum) - 0.3 ppm\u003cbr\u003e• Manganese (maximum) - 0.05 ppm\u003cbr\u003e• Copper - 1.3 ppm\u003cbr\u003e• *Oil \u0026amp; H2S -  Must be Removed Prior to OneFlow\u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow\u003cbr\u003e• Silica (maximum) - 20 ppm**\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning\u003c\/b\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard.NOTICE**  OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePRODUCT NOTICE\u003c\/b\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419448021272,"sku":"S0002153 ( OF240-4 )","price":2471.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_of240-4_system_2nd.jpg?v=1751302095"},{"product_id":"ofpsys_","title":"OneFlow Plus - Salt-Free Scale Prevention and Water Filtration System - OFPSYS","description":"\u003cp\u003e• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OFPSYS\u003cbr\u003e• Flow Rate: 3 GPM\u003cbr\u003e• Maximum Flow Rate: 10 gpm\u003cbr\u003e• Carbon filter Cartridge 20 Micron good for 50,000 gallons or 1 year.\u003cbr\u003e• Scale Prevention Cartridge good for 250,000 gallons or 3 years. \u003cbr\u003e• Pipe Connection Sizes: 1” MNPT\u003cbr\u003e• Dimensions: 10\" x 18\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Watts OneFlow Anti-Scale System\u003c\/strong\u003e The OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003c\/p\u003e\n\u003cdiv title=\"Page 3\" class=\"page\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Cartridge Replacement Frequency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv title=\"Page 3\" class=\"page\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%;\"\u003e\u003cstrong\u003eFilter Cartridge:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003e\u003cstrong\u003e Replacement Frequency: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%;\"\u003eRadial Flow Carbon Block\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eReplace Annually \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%;\"\u003eOneFlow® Scale Prevention Cartridge\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eReplace every 3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eOneFlow Standard Features\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness \u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain \u003cbr\u003e• No control valve, no electricity and no wastewater \u003cbr\u003e• Uses environmentally friendly “green” technology \u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not \u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate \u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes \u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health • OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOneFlow Standard Specifications\u003c\/strong\u003e A OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/strong\u003e\u003cstrong\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/strong\u003e\u003cbr\u003e• pH Levels - 6.5-8.5 \u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3) \u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar) \u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C) \u003cbr\u003e• Free Chlorine - \u0026lt; 2 ppm \u003cbr\u003e• Iron (maximum) - 0.3 ppm \u003cbr\u003e• Manganese (maximum) - 0.05 ppm \u003cbr\u003e• Copper - 1.3 ppm \u003cbr\u003e• *Oil \u0026amp; H2S - Must be Removed Prior to OneFlow \u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow \u003cbr\u003e• Silica (maximum) - 20 ppm**\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard. NOTICE** OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT NOTICE\u003c\/strong\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419561693464,"sku":"OFPSYS_7100638","price":828.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_plus.jpg?v=1751356090"},{"product_id":"ofprfc_7100639","title":"OFPRFC - Radial Flow Carbon Block Cartridge for OneFlow Plus System - 20 micron","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OFPRFC (for the OFPSYS system)\u003cbr\u003e• Flow Rate: 3 GPM\u003cbr\u003e• Maximum Flow Rate: 10 gpm\u003cbr\u003e• Carbon filter Cartridge 20 Micron good for 50,000 gallons or 1 year.\u003cbr\u003e• Pipe Connection Sizes: 1” MNPT\u003cbr\u003e• Dimensions: 18-3\/4\" (H) x 5-1\/2\" (W)\u003cbr\u003e\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zCNjHl8Ejzw\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Watts OneFlow Anti-Scale System\u003c\/strong\u003e The OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003c\/p\u003e\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Cartridge Replacement Frequency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; height: 54px;\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003eFilter Cartridge:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003e Replacement Frequency: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eRadial Flow Carbon Block (OFPRFC - this item)\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace Annually \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eOneFlow® Scale Prevention Cartridge\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace every 3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eOneFlow Standard Features\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness \u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain \u003cbr\u003e• No control valve, no electricity and no wastewater \u003cbr\u003e• Uses environmentally friendly “green” technology \u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not \u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate \u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes \u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health • OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOneFlow Standard Specifications\u003c\/strong\u003e A OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/strong\u003e\u003cstrong\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/strong\u003e\u003cbr\u003e• pH Levels - 6.5-8.5 \u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3) \u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar) \u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C) \u003cbr\u003e• Free Chlorine - \u0026lt; 2 ppm \u003cbr\u003e• Iron (maximum) - 0.3 ppm \u003cbr\u003e• Manganese (maximum) - 0.05 ppm \u003cbr\u003e• Copper - 1.3 ppm \u003cbr\u003e• *Oil \u0026amp; H2S - Must be Removed Prior to OneFlow \u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow \u003cbr\u003e• Silica (maximum) - 20 ppm**\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard. NOTICE** OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRODUCT NOTICE\u003c\/strong\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419561791768,"sku":"7100639","price":192.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_plus_filter2_1.jpg?v=1751356131"},{"product_id":"ofpsp_7100640","title":"OFPSP OneFlow Plus TAC cartridge scale prevention replacement filter","description":"\u003cp\u003e• Manufacturer: Watts \u003cbr\u003e• Brand: OneFlow® \u003cbr\u003e• Model: OFPSP (for the OFPSYS system, not included) \u003cbr\u003e• Flow Rate: 3 GPM \u003cbr\u003e• Maximum Flow Rate: 10 gpm \u003cbr\u003e• Scale Prevention Cartridge good for 250,000 gallons or 3 years. \u003cbr\u003e• Pipe Connection Sizes: 1” MNPT \u003cbr\u003e• Dimensions: 18-3\/4\" (H) x 2-1\/2\" (W)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zCNjHl8Ejzw\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Watts OneFlow Anti-Scale System\u003c\/strong\u003e The OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003c\/p\u003e\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Cartridge Replacement Frequency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; height: 54px;\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003eFilter Cartridge:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003e Replacement Frequency: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eRadial Flow Carbon Block \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace Annually \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eOneFlow® Scale Prevention Cartridge (this item)\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace every 3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eOneFlow Standard Features\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness \u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain \u003cbr\u003e• No control valve, no electricity and no wastewater \u003cbr\u003e• Uses environmentally friendly “green” technology \u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not \u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate \u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes \u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health • OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOneFlow Standard Specifications\u003c\/strong\u003e A OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/strong\u003e\u003cstrong\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/strong\u003e\u003cbr\u003e• pH Levels - 6.5-8.5 \u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3) \u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar) \u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C) \u003cbr\u003e• Free Chlorine - \u0026lt; 2 ppm \u003cbr\u003e• Iron (maximum) - 0.3 ppm \u003cbr\u003e• Manganese (maximum) - 0.05 ppm \u003cbr\u003e• Copper - 1.3 ppm \u003cbr\u003e• *Oil \u0026amp; H2S - Must be Removed Prior to OneFlow \u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow \u003cbr\u003e• Silica (maximum) - 20 ppm**\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard. NOTICE** OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRODUCT NOTICE\u003c\/strong\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419561857304,"sku":"OFPSP_7100640","price":413.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/oneflow_plus_tac_filter_1.jpg?v=1751356149"},{"product_id":"ofpsp_7100641","title":"Watts OFPCOM  OneFlow Plus Combo Pack - Carbon Block and OneFlow filter","description":"• Manufacturer: Watts\u003cbr\u003e• Brand: OneFlow®\u003cbr\u003e• Model: OFPSP (for the OFPSYS system, not included)\u003cbr\u003e• Flow Rate: 3 GPM\u003cbr\u003e• Maximum Flow Rate: 10 gpm\u003cbr\u003e• Combo pack includes both carbon block cartridge and OneFlow cartridge\u003cbr\u003e• Carbon filter Cartridge 20 Micron good for 50,000 gallons or 1 year.\u003cbr\u003e• OneFlow cartridge rated up to 250,000 gallons or replace every 3 years\u003cbr\u003e• Designed to reduce chlorine, tastes, and odors and prevent scale formation in plumbing systems.\u003cbr\u003e• Pipe Connection Sizes: 1” MNPT\u003cbr\u003e• Dimensions: 18-3\/4\" (H) x 2-1\/2\" (W)\u003cbr\u003e\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zCNjHl8Ejzw\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Watts OneFlow Anti-Scale System\u003c\/strong\u003e The OneFlow® Anti-Scale System provides protection from scale formation on internal plumbing surfaces. The OneFlow® system is a single cartridge-based system that may be installed on a cold water line prior to a water-using device (water heater, hot-beverage system, appliance, steamer etc.) that requires protection from the ill effects of hard water. OneFlow® prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles. These crystals stay suspended in the water and are passed to drain thereby having a greatly reduced ability to react negatively like dissolved hardness does. The system requires very little maintenance, no backwashing, no salt and no electricity. Typical hardness problems, especially build-up of scale in pipes, water heaters, boilers and on fixtures are no longer a concern. OneFlow® is not a water softener. It does not add chemicals. It is a scale prevention device with proven third party laboratory test data and years of successful Food Service and Commercial applications. OneFlow® is the intelligent scale solution and is a great alternative to water softening (ion exchange) or scale sequestering devices\u003c\/p\u003e\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Cartridge Replacement Frequency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 3\"\u003e\u003cdiv class=\"layoutArea\"\u003e\u003cdiv class=\"column\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; height: 54px;\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003eFilter Cartridge:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003e\u003cstrong\u003e Replacement Frequency: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eRadial Flow Carbon Block (included)\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace Annually \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eOneFlow® Scale Prevention Cartridge (included) \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 18px;\"\u003eReplace every 3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eOneFlow Standard Features\u003c\/strong\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e• Chemical free scale prevention and protection - converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® an effective alternative technology to a water softener for the prevention of scale due to water hardness \u003cbr\u003e• Virtually maintenance free - No salt bags or other chemicals to constantly add or maintain \u003cbr\u003e• No control valve, no electricity and no wastewater \u003cbr\u003e• Uses environmentally friendly “green” technology \u003cbr\u003e• Improves efficiency of all water appliances whether heating the water or not \u003cbr\u003e• Simple sizing \u0026amp; installation – all you need to know is pipe size and flow rate \u003cbr\u003e• Perfect system for restaurants, cafeterias and coffee shops where multiple or single equipment protection is desired for longer equipment life and reduced energy consumption\u003cbr\u003e• Inlet ball valve for easy isolation shutoff and filter changes \u003cbr\u003e• OneFlow® does not remove the essential minerals in water that are linked to good health • OneFlow® cartridge-based systems are easily maintained; change the cartridge once per year\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOneFlow Standard Specifications\u003c\/strong\u003e A OneFlow® scale prevention system shall be installed on the cold water service line to condition the tap water just prior to the service line feeding the equipment it is designed to protect. The system will be sized for maximum or peak flow rate based on the specification of said equipment. A OneFlow® system may also be installed to protect multiple pieces of equipment from the ill-effects of hard water scale provided the aggregate peak flow rate for each piece of equipment it is protecting has been considered. The system shall be plumbed with a bypass valve to allow isolation of filter housing to allow the bypass of untreated water in the event that service or cartridge replacement be necessary. The installation area should be suitable in size for the housing to be serviced without encumbrance and the system should be installed per the Installation, Operation \u0026amp; Maintenance manual as provided with each system.The OneFlow® system must not require additional waste water to backwash, flush, or regenerate once put into service. The system shall not require any chemical additives and shall not require electricity for operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Note: Copper lines need to be passivized for a minimum of 4 weeks before placing unit into service. Not for use on closed loop systems\u003c\/strong\u003e\u003cstrong\u003eFeed Water Chemistry Requirements for OneFlow Systems\u003c\/strong\u003e\u003cbr\u003e• pH Levels - 6.5-8.5 \u003cbr\u003e• Hardness (maximum) - 75 grains (1282 ppm CaCO3) \u003cbr\u003e• Water Pressure - 15 psi to 100 psi (1.03 bar to 6.9 bar) \u003cbr\u003e• Temperature - 40°F to 110°F (5° to 43°C) \u003cbr\u003e• Free Chlorine - \u0026lt; 2 ppm \u003cbr\u003e• Iron (maximum) - 0.3 ppm \u003cbr\u003e• Manganese (maximum) - 0.05 ppm \u003cbr\u003e• Copper - 1.3 ppm \u003cbr\u003e• *Oil \u0026amp; H2S - Must be Removed Prior to OneFlow \u003cbr\u003e• Poly-phosphates - Must be Removed Prior to OneFlow \u003cbr\u003e• Silica (maximum) - 20 ppm**\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e *High levels of Copper will foul OneFlow media and typically originates from new Copper plumbing. Wait a minimum of 4 weeks before placing system in operation. Avoid applying excess flux on the inner surfaces of the pipe and to use a low-corrosivity water soluble flux listed under the ASTM B813 standard. NOTICE** OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRODUCT NOTICE\u003c\/strong\u003e **OneFlow media does not reduce silica scaling. Silica can act as a binder that makes water spots and scale residue outside the plumbing system difficult to remove. This 20 ppm limitation is for aesthetic purposes.\u003c\/p\u003e","brand":"Watts Water","offers":[{"title":"Default Title","offer_id":50419571753240,"sku":"7100641","price":547.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/61rw5ag8hil._ac_sl1000.jpg?v=1751357177"},{"product_id":"swstac6","title":"Point-of-Use TAC Salt-Free Scale Prevention and Hard Water Conditioner","description":"• Manufacturer: Supreme Water Sales\u003cbr\u003e• Model: SWS-TAC\u003cbr\u003e• Flow Rate: 6 GPM\u003cbr\u003e• Scale Prevention Cartridge good for 3 years. \u003cbr\u003e• Pipe Connection Sizes: 3\/4” MNPT\u003cbr\u003e• Dimensions: 8\" x 24\" \u003cbr\u003e• Saves space, doens't require any floor space\u003cbr\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/Screenshot_2023-12-21_at_1.06.50_AM.png?v=1751303630\" alt=\"scale build up\" width=\"850\"\u003e\u003c\/p\u003e\u003cp\u003eIntroducing the Supreme Water Sales easy and convenient TAC (template assisted Crystalization) unit for salt-free water conditioning, now conveniently available in a cartridge-based format. Delivering its advanced technology to our point-of-use units designed specifically for low-flow applications, all at an affordable price point. Featuring user-friendly quick-connect 3\/4\" fittings, the installation process for these treatment systems is not only straightforward but also highly efficient.\u003c\/p\u003e\u003cp\u003eCrafted to protect investments in both tankless and traditional tank-type water heaters, our compact hard water conditioners are strategically positioned on the hot water line just before the water heaters. If your home's flow rate remains below 6 gallons per minute (perfect for small homes or cabins), our largest model is designed to cater to your entire household's needs.\u003c\/p\u003e\u003cp\u003eWhile maintenance for the tank-based units is already hassle-free, our point-of-use units take it a step further by presenting the TAC media in an easily manageable up-flow cartridge shell. These shells come equipped with a built-in sediment filter and should be replaced every 3 years. The inclusion of on\/off valves on the unit ensures that isolation and cartridge replacement are as straightforward as possible.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAdvantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnhanced Power! While the media is a crucial element in the system, it contributes significantly to the overall costs. In contrast to numerous competitors who cut costs by reducing media volume, we offer an additional 15% more media. This leads to improved performance and a longer operational life.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComponents validated by third parties, offering assurance regarding material safety and structural integrity for your peace of mind.\u003c\/li\u003e\n\u003cli\u003eNo Salt\u003c\/li\u003e\n\u003cli\u003eNo electricity\u003c\/li\u003e\n\u003cli\u003eNo backwashing\u003c\/li\u003e\n\u003cli\u003eNo wasted water \u003c\/li\u003e\n\u003cli\u003eLast 3 years - saving you dozens of bags of salt! \u003c\/li\u003e\n\u003cli\u003eSaves space, doens't require any floor space\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Accessories\u003c\/p\u003e\u003cp\u003e- heavy-duty powder-coated mounting bracket\u003cbr\u003e- spanner wrench\u003cbr\u003e- inlet and outlet shut-off valves\u003cbr\u003e- pressure relief button\u003cbr\u003e- TAC filter cartridge\u003cbr\u003e- built-in sediment filter\u003cbr\u003e- instruction manual\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/Screenshot_2023-12-21_at_12.37.12_AM.png?v=1751303636\" alt=\"\" width=\"850\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese units come standard with 3\/4\" John Guest quick-connect fittings for the inlet and outlet. These allow for quick and easy connections to both copper and PEX piping, saving you costs on installation. If the piping in your home is larger or smaller than 3\/4\", you will require basic couplers to expand or reduce to these connectors. These are readily available at any hardware store.\u003c\/p\u003e\u003cp\u003eThe TAC conditioner is designed to be installed after any treatment for removal of iron, manganese, hydrogen sulfide, sediment, and chlorine, but before a UV disinfection system and before a chlorinator (if equipped). Polyphosphate feeders should never be placed before a TAC conditioner. TAC treatment should also be done prior to any water heating equipment.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Supreme Water Sales","offers":[{"title":"Default Title","offer_id":50419618578712,"sku":"swsTAC6","price":451.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/screenshot_2023-12-21_at_1.14.50_am.png?v=1751361671"}],"url":"https:\/\/supremewatersalv.com\/collections\/oneflow-inline-anti-scale-systems.oembed","provider":"Supreme Water Sales","version":"1.0","type":"link"}