{"title":"Cistern \/ Bottom Suction Pumps","description":"\u003ch2\u003e\u003cstrong\u003e55% OFF most Water Pumps \u0026amp; Equipment! \u003c\/strong\u003e\u003c\/h2\u003e","products":[{"product_id":"dominator-20dom121-plus-1","title":"Starite 20DOM05121+1 - Bottom Suction - Cistern - Effluent Submersible Pump - 20 GPM - 1\/2 HP - 115V","description":"• Manufacturer: Pentair\u003cbr\u003e• Brand: Starite\u003cbr\u003e• Series: Dominator Series - 4\" Bottom Suction\u003cbr\u003e• MPN: 20DOM05121+1\u003cbr\u003e\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Maximum Amperage: 10.6 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 10 Feet\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Rated: 20 GPM \u003cbr\u003e• TDH (Total Dynamic Head Rated): 110 TDH\u003cbr\u003e• PSI Rated: 47 PSI\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR SERIES - 4\" Bottom Suction Submersible Pumps \u003c\/b\u003e\u003cbr\u003eStarite Dominator pumps are built on a ½ HP legacy of delivering water when and where you need it for aerobic, cistern \u0026amp; filtered effluent service applications.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSTARITE® DOMINATOR - Product Highlights\u003cbr\u003e• SUPERIOR “PUMP-DOWN” CAPABILITY: The Dominator leads this class with the lowest draw-down of 4.5” (a standard 4” NEMA submersible only draws down to 13.5)\u003cbr\u003e• IMPELLERS: Precision molded for perfect balance...ultra smooth for the highest performance and efficiency. Allows for .080” solids.\u003cbr\u003e• REDUCED AMP DRAW: Over 25% less amp draw (9.5 amps vs. 12.7 amps, 115 volt)than a 4” NEMA submersible, reducing operating costs and extending the service life of float switch contacts\u003cbr\u003e• SHELL: Corrosion resistant 300-grade stainless steel\u003cbr\u003e• SignaSeal™ Internals: Utilizes a patented ceramic wear staging system surface for class-leading performance, superior sand handling, and a thrust management staging system with industry exclusive “dry-run” capabilities\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR - Typical Uses\u003c\/b\u003e\u003cbr\u003e• Effluent \u003cbr\u003e• Cistern\u003cbr\u003e• Tank Transfers\u003cbr\u003e• Aerobatic\u003cbr\u003e• Irrigation \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR - Materials of Construction\u003c\/b\u003e\u003cbr\u003e• Motor – Available in both 115 or 230 volt versions. Dry-wound, double ball bearing, double-sealed, with thermal overload protection, UL and CSA approved.\u003cbr\u003e• Shell – Stainless steel (300 grade)\u003cbr\u003e• Discharge – 1-1\/4” Fiberglass- reinforced thermoplastic\u003cbr\u003e• Discharge Bearing – Nylatron®\u003cbr\u003e• Impellers – Acetel\u003cbr\u003e• Diffusers – Polycarbonate\u003cbr\u003e• Suction Caps – Polycarbonate with stainless steel wear ring\u003cbr\u003e• Thrust Pads – Proprietary spec.\u003cbr\u003e• Shaft and Coupling – Stainless steel 300 grade\u003cbr\u003e• Intake – Fiberglass-reinforced thermoplastic\u003cbr\u003e• Intake Screen – Stainless steel\u003cbr\u003e• Jacketed Cord – 300 Volt “SJOW”  jacketed 10’ leads, 2-wire with ground\u003cbr\u003e• Agency Listing – UL and CSA\u003c\/p\u003e","brand":"StaRite","offers":[{"title":"Default Title","offer_id":50419393626392,"sku":"20DOM05121+1","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/20dom_2nd.jpg?v=1751298621"},{"product_id":"dominator-20dom221-plus-1","title":"Starite 20DOM05221+1 Effluent Submersible Pump, 20 GPM, 1\/2 HP, 230V","description":"• Manufacturer: Pentair\u003cbr\u003e• Brand: Starite\u003cbr\u003e• Series: Dominator Series - 4\" Bottom Suction\u003cbr\u003e• MPN: 20DOM05221+1\u003cbr\u003e\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Maximum Amperage: 5.3 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 10 Feet\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Rated: 20 GPM \u003cbr\u003e• TDH (Total Dynamic Head Rated): 110 TDH\u003cbr\u003e• PSI Rated: 47 PSI\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR SERIES - 4\" Bottom Suction Submersible Pumps \u003c\/b\u003e\u003cbr\u003eStarite Dominator pumps are built on a ½ HP legacy of delivering water when and where you need it for aerobic, cistern \u0026amp; filtered effluent service applications.\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSTARITE® DOMINATOR - Product Highlights\u003cbr\u003e• SUPERIOR “PUMP-DOWN” CAPABILITY: The Dominator leads this class with the lowest draw-down of 4.5” (a standard 4” NEMA submersible only draws down to 13.5)\u003cbr\u003e• IMPELLERS: Precision molded for perfect balance...ultra smooth for the highest performance and efficiency. Allows for .080” solids.\u003cbr\u003e• REDUCED AMP DRAW: Over 25% less amp draw (9.5 amps vs. 12.7 amps, 115 volt)than a 4” NEMA submersible, reducing operating costs and extending the service life of float switch contacts\u003cbr\u003e• SHELL: Corrosion resistant 300-grade stainless steel\u003cbr\u003e• SignaSeal™ Internals: Utilizes a patented ceramic wear staging system surface for class-leading performance, superior sand handling, and a thrust management staging system with industry exclusive “dry-run” capabilities\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR - Typical Uses\u003c\/b\u003e\u003cbr\u003e• Effluent \u003cbr\u003e• Cistern\u003cbr\u003e• Tank Transfers\u003cbr\u003e• Aerobatic\u003cbr\u003e• Irrigation \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSTARITE® DOMINATOR - Materials of Construction\u003c\/b\u003e\u003cbr\u003e• Motor – Available in both 115 or 230 volt versions. Dry-wound, double ball bearing, double-sealed, with thermal overload protection, UL and CSA approved.\u003cbr\u003e• Shell – Stainless steel (300 grade)\u003cbr\u003e• Discharge – 1-1\/4” Fiberglass- reinforced thermoplastic\u003cbr\u003e• Discharge Bearing – Nylatron®\u003cbr\u003e• Impellers – Acetel\u003cbr\u003e• Diffusers – Polycarbonate\u003cbr\u003e• Suction Caps – Polycarbonate with stainless steel wear ring\u003cbr\u003e• Thrust Pads – Proprietary spec.\u003cbr\u003e• Shaft and Coupling – Stainless steel 300 grade\u003cbr\u003e• Intake – Fiberglass-reinforced thermoplastic\u003cbr\u003e• Intake Screen – Stainless steel\u003cbr\u003e• Jacketed Cord – 300 Volt “SJOW”  jacketed 10’ leads, 2-wire with ground\u003cbr\u003e• Agency Listing – UL and CSA\u003c\/p\u003e","brand":"StaRite","offers":[{"title":"Default Title","offer_id":50419393757464,"sku":"20DOM05221+1","price":699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/20dom_1_2nd.jpg?v=1751298639"},{"product_id":"90302015","title":"Franklin Electric 90302015 - Bottom Suction - Cistern - Effluent Submersible Pump -1\/2 HP - 115 Volt - 20 GPM","description":"• Manufacturer: Franklin Electric\u003cbr\u003e• Brand: Franklin Electric\u003cbr\u003e• Series: C1 Series - 4\" Bottom Suction\u003cbr\u003e• Model Number: 20XC1-05P4-2W115\u003cbr\u003e• MPN: 90302015\u003cbr\u003e\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 10 Feet\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Rated: 20 GPM \u003cbr\u003e• TDH (Total Dynamic Head Rated): 100 TDH\u003cbr\u003e• PSI Rated: 43 PSI\u003cbr\u003e\u003cb\u003eFranklin Electric C1 Series 4\" Cistern Submersible Pumps\u003c\/b\u003e\u003cbr\u003eDesigned for use in gray water\/filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1\/8-inch without having a negative effect on the internal hydraulic components.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Applications of the C1 Series Pump\u003c\/b\u003e\u003cbr\u003e• Gray water pumping\u003cbr\u003e• Cistern Tanks\u003cbr\u003e• Aerator Tanks\u003cbr\u003e• Well Pump\u003cbr\u003e• Filtered effluent service water pumping\u003cbr\u003e• Water reclamation projects such as pumping from rain catchment basins\u003cbr\u003e• Aeration and other foundation or pond applications\u003cbr\u003e• Agriculture and livestock water pumping\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features - Franklin Electric C1 Series Pumps\u003c\/b\u003e\u003cbr\u003e• Supplied with a removable 5\" base for secure and reliable mounting\u003cbr\u003e• 4\" Bottom suction design\u003cbr\u003e• Robust thermoplastic discharge head design resists breakage during installation and operation\u003cbr\u003e• Single shell housing design provides a compact unit while ensuring cool and quiet operation\u003cbr\u003e• Hydraulic components molded from high quality engineered thermoplastics\u003cbr\u003e• Optimized hydraulic design allows for increased performance and decreased power usage\u003cbr\u003e• All metal components are made of high grade stainless steel for corrosion resistance\u003cbr\u003e• Available with a high quality 115 V or 230 V, ½ hp motor\u003cbr\u003e• Fluid flows of 10, 20, and 30 gpm, with a max shut-off pressure of over 100 psi\u003cbr\u003e• Heavy duty 600 V 10 foot SJOOW jacketed lead\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/owners-manual_1.pdf?v=1756284708\" target=\"_blank\" rel=\"noopener\"\u003emanual.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/Franklin_Electric_c1.pdf?v=1756288969\" target=\"_blank\"\u003eFranklin_Electric_c1\u003c\/a\u003e\u003c\/p\u003e","brand":"Franklin Electric","offers":[{"title":"Default Title","offer_id":50419400343832,"sku":"90302015","price":1216.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/franklin_c1_series_1_2nd.jpg?v=1751299524"},{"product_id":"90302020","title":"Franklin Electric 90302020 - Bottom Suction - Cistern - Effluent Submersible Pump - 1\/2 HP - 230 Volt - 20 GPM","description":"\u003cp\u003e• Manufacturer: Franklin Electric\u003cbr\u003e• Series: C1 Series - 4\" Bottom Suction\u003cbr\u003e• Model Number: 20XC1-05P4-2W230\u003cbr\u003e• MPN: 90302020\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 10 Feet\u003cbr\u003e• Discharge outlet: 1.5\"\u003cbr\u003e• GPM Rated: 20 GPM \u003cbr\u003e• TDH (Total Dynamic Head Rated): 100 TDH\u003cbr\u003e• PSI Rated: 43 PSI\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eFranklin Electric C1 Series 4\" Cistern Submersible Pumps\u003c\/strong\u003e\u003cbr\u003eDesigned for use in gray water\/filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1\/8-inch without having a negative effect on the internal hydraulic components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTypical Applications of the C1 Series Pump\u003c\/strong\u003e\u003cbr\u003e• Gray water pumping \u003cbr\u003e• Cistern Tanks \u003cbr\u003e• Aerator Tanks \u003cbr\u003e• Well Pump \u003cbr\u003e• Filtered effluent service water pumping \u003cbr\u003e• Water reclamation projects such as pumping from rain catchment basins \u003cbr\u003e• Aeration and other foundation or pond applications \u003cbr\u003e• Agriculture and livestock water pumping\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard Features - Franklin Electric C1 Series Pumps\u003c\/strong\u003e\u003cbr\u003e• Supplied with a removable 5\" base for secure and reliable mounting \u003cbr\u003e• 4\" Bottom suction design \u003cbr\u003e• Robust thermoplastic discharge head design resists breakage during installation and operation \u003cbr\u003e• Single shell housing design provides a compact unit while ensuring cool and quiet operation \u003cbr\u003e• Hydraulic components molded from high quality engineered thermoplastics \u003cbr\u003e• Optimized hydraulic design allows for increased performance and decreased power usage \u003cbr\u003e• All metal components are made of high grade stainless steel for corrosion resistance \u003cbr\u003e• Available with a high quality 115 V or 230 V, ½ hp motor \u003cbr\u003e• Fluid flows of 10, 20, and 30 gpm, with a max shut-off pressure of over 100 psi \u003cbr\u003e• Heavy duty 600 V - 10 foot SJOOW jacketed lead\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/owners-manual_1.pdf?v=1756284708\" target=\"_blank\" rel=\"noopener\"\u003emanual.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/Franklin_Electric_c1.pdf?v=1756288969\" target=\"_blank\"\u003eFranklin_Electric_c1\u003c\/a\u003e\u003c\/p\u003e","brand":"Franklin Electric","offers":[{"title":"Default Title","offer_id":50419400540440,"sku":"90302020","price":1217.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/franklin_c1_series_2nd.jpg?v=1751299536"},{"product_id":"mxs202s11","title":"Munro MXS202S11 - Multistage Bottom Suction Submersible Pumps - 3\/4 hp - 110 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS202S11 \u003cbr\u003e• MPN: MXS202S11\u003cbr\u003e\u003cbr\u003e• Horsepower: 3\/4 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Amp Draw: 8.5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 15 - 20 GPM \u003cbr\u003e• Optimum TDH Range: 60 to 80 FT - TDH\u003cbr\u003e• Optimum PSI Range: 25 to 35 PSI\u003cbr\u003e• Max Shut Off PSI: 39 PSI ( 90 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 15.75\" (L)\u003cbr\u003e• Weight: 29 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS202S11 \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419444187416,"sku":"MXS202S11","price":1044.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_2nd.jpg?v=1751301899"},{"product_id":"mxs202s11-413","title":"Munro MXS203S11 - Multistage Bottom Suction Submersible Pumps - 1 hp - 110 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS203S11\u003cbr\u003e• MPN: MXS203S11\u003cbr\u003e\u003cbr\u003e• Horsepower: 1 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Amp Draw: 10.5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 15 - 20 GPM \u003cbr\u003e• Optimum TDH Range: 90 to 120 FT - TDH\u003cbr\u003e• Optimum PSI Range: 40 to 60 PSI\u003cbr\u003e• Max Shut Off PSI: 69 PSI ( 160 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 17.50\" (L)\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS203S11\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419444482328,"sku":"MXS203S11","price":1363.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_2nd.jpg?v=1751301911"},{"product_id":"mxs203s22","title":"Munro MXS203S22 - Multistage Bottom Suction Submersible Pumps - 1 hp - 230 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS203S22\u003cbr\u003e• MPN: MXS203S22\u003cbr\u003e\u003cbr\u003e• Horsepower: 1 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Amp Draw: 5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 15 - 20 GPM \u003cbr\u003e• Optimum TDH Range: 90 to 120 FT - TDH\u003cbr\u003e• Optimum PSI Range: 40 to 60 PSI\u003cbr\u003e• Max Shut Off PSI: 69 PSI ( 160 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 17.50\" (L)\u003cbr\u003e• Weight: 29 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS203S22\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419444580632,"sku":"MXS203S22","price":1363.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_1_2nd.jpg?v=1751301923"},{"product_id":"mxs204s11","title":"Munro MXS204S11 - Multistage Bottom Suction Submersible Pumps - 1.2 hp - 110 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS204S11\u003cbr\u003e• MPN: MXS204S11\u003cbr\u003e\u003cbr\u003e• Horsepower: 1.2 HP\u003cbr\u003e• Voltage: 110 Volts\u003cbr\u003e• Amp Draw: 13.5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 20 - 25 GPM \u003cbr\u003e• Optimum TDH Range: 130 to 160 FT - TDH\u003cbr\u003e• Optimum PSI Range: 55 to 70 PSI\u003cbr\u003e• Max Shut Off PSI: 90 PSI ( 205 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 20.0\" (L)\u003cbr\u003e• Weight: 39 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS204S11\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419444678936,"sku":"MXS204S11","price":1573.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_1_1_2nd.jpg?v=1751301935"},{"product_id":"mxs204s22","title":"Munro MXS204S22 - Multistage Bottom Suction Submersible Pumps - 1.2 hp - 220 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS204S22\u003cbr\u003e• MPN: MXS204S22\u003cbr\u003e\u003cbr\u003e• Horsepower: 1.2 HP\u003cbr\u003e• Voltage: 220 Volts\u003cbr\u003e• Amp Draw: 7 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 20 - 25 GPM \u003cbr\u003e• Optimum TDH Range: 130 to 160 FT -TDH\u003cbr\u003e• Optimum PSI Range: 55 to 70 PSI\u003cbr\u003e• Max Shut Off PSI: 90 PSI ( 205 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 20.0\" (L)\u003cbr\u003e• Weight: 39 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS204S11\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419444973848,"sku":"MXS204S22","price":1573.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_1_1_1_2nd.jpg?v=1751301947"},{"product_id":"mxs205s22","title":"Munro MXS205S22 - Multistage Bottom Suction Submersible Pumps - 1-1\/2 hp - 220 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS205S22\u003cbr\u003e• MPN: MXS205S22\u003cbr\u003e\u003cbr\u003e• Horsepower: 1-1\/2 HP\u003cbr\u003e• Voltage: 220 Volts\u003cbr\u003e• Amp Draw: 8 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 10 - 20 GPM \u003cbr\u003e• Optimum TDH Range: 150 to 200 FT -TDH\u003cbr\u003e• Optimum PSI Range: 65 to 85 PSI\u003cbr\u003e• Max Shut Off PSI: 108 PSI ( 250 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 21.0\" (L)\u003cbr\u003e• Weight: 40.0 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS205S22\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419446907160,"sku":"MXS205S22","price":1464.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/screenshot_2024-05-29_at_1.25.30_am.png?v=1751301959"},{"product_id":"mxs206s22","title":"Munro MXS206S22 - Multistage Bottom Suction Submersible Pumps - 2 hp - 220 v","description":"• Manufacturer: Munro\u003cbr\u003e• Brand: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS206S22\u003cbr\u003e• MPN: MXS206S22\u003cbr\u003e\u003cbr\u003e• Horsepower: 2 HP\u003cbr\u003e• Voltage: 220 Volts\u003cbr\u003e• Amp Draw: 9.5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 20 - 30 GPM \u003cbr\u003e• Optimum TDH Range: 150 to 230 FT - TDH\u003cbr\u003e• Optimum PSI Range: 65 to 100 PSI\u003cbr\u003e• Max Shut Off PSI \/ TDH: 135 PSI ( 320 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 23.0\" (L)\u003cbr\u003e• Weight: 46.00 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS206S22\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419447005464,"sku":"MXS206S22","price":1678.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_1_1_1_1_1_2nd.jpg?v=1751301976"},{"product_id":"4msp-05a16s","title":"Pearl MiniSub  - Bottom Suction - Cistern - Effluent Submersible Pump - 1\/2 HP - 115V","description":"• Manufacturer: Pearl\u003cbr\u003e• Series: 4MSP - MiniSub \u003cbr\u003e• Pump Type: Submersible - Bottom Suction \u003cbr\u003e\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Maximum Amperage: 9.5 amps\u003cbr\u003e• Motor Wires: 2-Wires ( L1 \/ L2 \/ Ground )\u003cbr\u003e• Power Cord Length: 8 Feet\u003cbr\u003e\u003cbr\u003e• Optimum GPM Range: 10 to 20 GPM\u003cbr\u003e• Optimum TDH Range: 95 to 140 feet TDH\u003cbr\u003e• Optimum PSI Range: 40 to 60 PSI\u003cbr\u003e\u003cb\u003ePEARL MiniSub - Bottom Suction - Cistern - Tank - Effluent - Bottom Suction - Submersible Pumps\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Pearl bottom suction submersible pump, MiniSub, is a pump designed for various applications in agricultural and residential markets. This pump, with the suction located at the bottom part, can be used for water distribution and can be installed in any type of cistern. Given the characteristics of MiniSub's design and construction is suitable for handling clean water and treated effluent.The suction at the bottom guarantees the quiet operation of the pump, motor cooling efficiency and the not required use of an external sleeve for cooling. The pumped liquid is circulated through the sleeve of the motor, ensuring optimum operating temperature and reducing the noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePearl MiniSub Typical Uses and Applications\u003c\/b\u003e\u003cbr\u003e• Multi purpose applications in the residential, agriculture and industrial markets\u003cbr\u003e• Perfect for Cisterns, Tanks, Residential \u0026amp; Home water, pressure boosting applications, light irrigation and water transfer\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features of the Pearl Mini-Sub Pumps\u003c\/b\u003e \u003cbr\u003e• Continuous duty: PEARL MINISUB CISTERN \u0026amp; EFFLUENT pumps can operate continuously without damage to any component\u003cbr\u003e• Impeller Floating System: Designed to guarantee the best performance and durability for sand handling\u003cbr\u003e\u003cbr\u003e• 4” Bottom suction effluent \/ cistern type submersible pump\u003cbr\u003e• Techno-polymer discharge head with stainless steel insert\u003cbr\u003e• Comes with 8-Feet of Power Cord\/Cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials of Construction:\u003c\/b\u003e\u003cbr\u003e• Discharge: Technopolymer\u003cbr\u003e• Pump bearing: Nylatron\u003cbr\u003e• Check valve: Technopolymer\u003cbr\u003e• External sleeve: Stainless Steel 304 Polished\u003cbr\u003e• Impellers: Acetal\u003cbr\u003e• Diffusers: Polycarbonate\u003cbr\u003e• Wear ring: Polycarbonate \/ Stainless Steel 304\u003cbr\u003e• Shaft: Stainless Steel 304\u003cbr\u003e• Suction grid: Stainless Steel 304","brand":"Pearl","offers":[{"title":"Default Title","offer_id":50419481215256,"sku":"4MSP-05A16S","price":1140.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/pearl_mini-sub_2nd.jpg?v=1751305260"},{"product_id":"4msp-05c16s","title":"Pearl MiniSub  - Bottom Suction - Cistern - Effluent Submersible Pump - 1\/2 HP - 230V","description":"• Manufacturer: Pearl\u003cbr\u003e• Series: 4MSP - MiniSub \u003cbr\u003e• Pump Type: Submersible - Bottom Suction \u003cbr\u003e\u003cbr\u003e• Horsepower: 1\/2 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Maximum Amperage: 4.8 amps\u003cbr\u003e• Motor Wires: 2-Wires ( L1 \/ L2 \/ Ground )\u003cbr\u003e• Power Cord Length: 8 Feet\u003cbr\u003e\u003cbr\u003e• Optimum GPM Range: 10 to 20 GPM\u003cbr\u003e• Optimum TDH Range: 95 to 140 feet TDH\u003cbr\u003e• Optimum PSI Range: 40 to 60 PSI\u003cbr\u003e\u003cb\u003ePEARL MiniSub - Bottom Suction - Cistern - Tank - Effluent - Bottom Suction - Submersible Pumps\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Pearl bottom suction submersible pump, MiniSub, is a pump designed for various applications in agricultural and residential markets. This pump, with the suction located at the bottom part, can be used for water distribution and can be installed in any type of cistern. Given the characteristics of MiniSub's design and construction is suitable for handling clean water and treated effluent.The suction at the bottom guarantees the quiet operation of the pump, motor cooling efficiency and the not required use of an external sleeve for cooling. The pumped liquid is circulated through the sleeve of the motor, ensuring optimum operating temperature and reducing the noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePearl MiniSub Typical Uses and Applications\u003c\/b\u003e\u003cbr\u003e• Multi purpose applications in the residential, agriculture and industrial markets\u003cbr\u003e• Perfect for Cisterns, Tanks, Residential \u0026amp; Home water, pressure boosting applications, light irrigation and water transfer\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features of the Pearl Mini-Sub Pumps\u003c\/b\u003e \u003cbr\u003e• Continuous duty: PEARL MINISUB CISTERN \u0026amp; EFFLUENT pumps can operate continuously without damage to any component\u003cbr\u003e• Impeller Floating System: Designed to guarantee the best performance and durability for sand handling\u003cbr\u003e\u003cbr\u003e• 4” Bottom suction effluent \/ cistern type submersible pump\u003cbr\u003e• Techno-polymer discharge head with stainless steel insert\u003cbr\u003e• Comes with 8-Feet of Power Cord\/Cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials of Construction:\u003c\/b\u003e\u003cbr\u003e• Discharge: Technopolymer\u003cbr\u003e• Pump bearing: Nylatron\u003cbr\u003e• Check valve: Technopolymer\u003cbr\u003e• External sleeve: Stainless Steel 304 Polished\u003cbr\u003e• Impellers: Acetal\u003cbr\u003e• Diffusers: Polycarbonate\u003cbr\u003e• Wear ring: Polycarbonate \/ Stainless Steel 304\u003cbr\u003e• Shaft: Stainless Steel 304\u003cbr\u003e• Suction grid: Stainless Steel 304","brand":"Pearl","offers":[{"title":"Default Title","offer_id":50419481280792,"sku":"4MSP-05C16S","price":1036.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/pearl_mini-sub_1_2nd.jpg?v=1751305277"},{"product_id":"4msp-07c16s","title":"Pearl MiniSub - Bottom Suction - Cistern - Effluent Submersible Pump - 3\/4 HP - 230V","description":"• Manufacturer: Pearl\u003cbr\u003e• Series: 4MSP - MiniSub \u003cbr\u003e• Pump Type: Submersible - Bottom Suction \u003cbr\u003e\u003cbr\u003e• Horsepower: 3\/4 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Maximum Amperage: 6.8 amps\u003cbr\u003e• Motor Wires: 2-Wires ( L1 \/ L2 \/ Ground )\u003cbr\u003e• Power Cord Length: 8 Feet\u003cbr\u003e\u003cbr\u003e• Optimum GPM Range: 10 to 20 GPM\u003cbr\u003e• Optimum TDH Range: 120 to 160 feet TDH\u003cbr\u003e• Optimum PSI Range: 50 to 70 PSI\u003cbr\u003e\u003cb\u003ePEARL MiniSub - Bottom Suction - Cistern - Tank - Effluent - Bottom Suction - Submersible Pumps\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Pearl bottom suction submersible pump, MiniSub, is a pump designed for various applications in agricultural and residential markets. This pump, with the suction located at the bottom part, can be used for water distribution and can be installed in any type of cistern. Given the characteristics of MiniSub's design and construction is suitable for handling clean water and treated effluent.The suction at the bottom guarantees the quiet operation of the pump, motor cooling efficiency and the not required use of an external sleeve for cooling. The pumped liquid is circulated through the sleeve of the motor, ensuring optimum operating temperature and reducing the noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePearl MiniSub Typical Uses and Applications\u003c\/b\u003e\u003cbr\u003e• Multi purpose applications in the residential, agriculture and industrial markets\u003cbr\u003e• Perfect for Cisterns, Tanks, Residential \u0026amp; Home water, pressure boosting applications, light irrigation and water transfer\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features of the Pearl Mini-Sub Pumps\u003c\/b\u003e \u003cbr\u003e• Continuous duty: PEARL MINISUB CISTERN \u0026amp; EFFLUENT pumps can operate continuously without damage to any component\u003cbr\u003e• Impeller Floating System: Designed to guarantee the best performance and durability for sand handling\u003cbr\u003e\u003cbr\u003e• 4” Bottom suction effluent \/ cistern type submersible pump\u003cbr\u003e• Techno-polymer discharge head with stainless steel insert\u003cbr\u003e• Comes with 8-Feet of Power Cord\/Cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials of Construction:\u003c\/b\u003e\u003cbr\u003e• Discharge: Technopolymer\u003cbr\u003e• Pump bearing: Nylatron\u003cbr\u003e• Check valve: Technopolymer\u003cbr\u003e• External sleeve: Stainless Steel 304 Polished\u003cbr\u003e• Impellers: Acetal\u003cbr\u003e• Diffusers: Polycarbonate\u003cbr\u003e• Wear ring: Polycarbonate \/ Stainless Steel 304\u003cbr\u003e• Shaft: Stainless Steel 304\u003cbr\u003e• Suction grid: Stainless Steel 304","brand":"Pearl","offers":[{"title":"Default Title","offer_id":50419481346328,"sku":"4MSP-07C16S","price":1429.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/pearl_mini-sub_1_1_2nd.jpg?v=1751305295"},{"product_id":"4msp-07a16s","title":"Pearl MiniSub - Bottom Suction - Cistern - Effluent Submersible Pump - 3\/4 HP - 115V","description":"• Manufacturer: Pearl\u003cbr\u003e• Series: 4MSP - MiniSub \u003cbr\u003e• Pump Type: Submersible - Bottom Suction \u003cbr\u003e\u003cbr\u003e• Horsepower: 3\/4 HP\u003cbr\u003e• Voltage: 115 Volts\u003cbr\u003e• Maximum Amperage: 12.0 amps\u003cbr\u003e• Motor Wires: 2-Wires ( L1 \/ L2 \/ Ground )\u003cbr\u003e• Power Cord Length: 8 Feet\u003cbr\u003e\u003cbr\u003e• Optimum GPM Range: 10 to 20 GPM\u003cbr\u003e• Optimum TDH Range: 120 to 160 feet TDH\u003cbr\u003e• Optimum PSI Range: 50 to 70 PSI\u003cbr\u003e\u003cb\u003ePEARL MiniSub - Bottom Suction - Cistern - Tank - Effluent - Bottom Suction - Submersible Pumps\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Pearl bottom suction submersible pump, MiniSub, is a pump designed for various applications in agricultural and residential markets. This pump, with the suction located at the bottom part, can be used for water distribution and can be installed in any type of cistern. Given the characteristics of MiniSub's design and construction is suitable for handling clean water and treated effluent.The suction at the bottom guarantees the quiet operation of the pump, motor cooling efficiency and the not required use of an external sleeve for cooling. The pumped liquid is circulated through the sleeve of the motor, ensuring optimum operating temperature and reducing the noise.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePearl MiniSub Typical Uses and Applications\u003c\/b\u003e\u003cbr\u003e• Multi purpose applications in the residential, agriculture and industrial markets\u003cbr\u003e• Perfect for Cisterns, Tanks, Residential \u0026amp; Home water, pressure boosting applications, light irrigation and water transfer\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features of the Pearl Mini-Sub Pumps\u003c\/b\u003e \u003cbr\u003e• Continuous duty: PEARL MINISUB CISTERN \u0026amp; EFFLUENT pumps can operate continuously without damage to any component\u003cbr\u003e• Impeller Floating System: Designed to guarantee the best performance and durability for sand handling\u003cbr\u003e\u003cbr\u003e• 4” Bottom suction effluent \/ cistern type submersible pump\u003cbr\u003e• Techno-polymer discharge head with stainless steel insert\u003cbr\u003e• Comes with 8-Feet of Power Cord\/Cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials of Construction:\u003c\/b\u003e\u003cbr\u003e• Discharge: Technopolymer\u003cbr\u003e• Pump bearing: Nylatron\u003cbr\u003e• Check valve: Technopolymer\u003cbr\u003e• External sleeve: Stainless Steel 304 Polished\u003cbr\u003e• Impellers: Acetal\u003cbr\u003e• Diffusers: Polycarbonate\u003cbr\u003e• Wear ring: Polycarbonate \/ Stainless Steel 304\u003cbr\u003e• Shaft: Stainless Steel 304\u003cbr\u003e• Suction grid: Stainless Steel 304","brand":"Pearl","offers":[{"title":"Default Title","offer_id":50419481411864,"sku":"4MSP-07A16S","price":1429.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/pearl_mini-sub_1_1_1_2nd.jpg?v=1751305312"},{"product_id":"mxs203t22","title":"Munro MXS203T22 - Multistage Bottom Suction Submersible Pumps - 1 hp - 240 v - 3-Ph","description":"• Manufacturer: Munro\u003cbr\u003e• Series: MX5 \u003cbr\u003e• Model Number: MXS203T22\u003cbr\u003e\u003cbr\u003e• Horsepower: 1 HP\u003cbr\u003e• Voltage: 230 Volts\u003cbr\u003e• Amp Draw: 5 amps\u003cbr\u003e• Motor Wires: 3-Wires ( + Ground Wire ) \u003cbr\u003e• Requires Control Box: No\u003cbr\u003e• Phase \/ Hz: Single Phase \/ 60 Hz\u003cbr\u003e• Cord Length: 14.5 Feet ( 16\/3 Gauge )\u003cbr\u003e• Discharge Pipe Connection: 1-1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Rated\u003c\/b\u003e\u003cbr\u003e• GPM Range: 15 - 20 GPM \u003cbr\u003e• Optimum TDH Range: 90 to 120 FT - TDH\u003cbr\u003e• Optimum PSI Range: 40 to 60 PSI\u003cbr\u003e• Max Shut Off PSI: 69 PSI ( 160 FT - TDH )\u003cbr\u003e\u003cbr\u003e• Pump Dimensions: 5\" (W) x 17.50\" (L)\u003cbr\u003e• Weight: 30 lbs\u003cbr\u003e\u003cb\u003eMunro MXS 5\" Multistage Bottom Suction Submersible Pumps - MXS203T22\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMunro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features \u0026amp; Highlights\u003c\/b\u003e\u003cbr\u003e• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications\u003cbr\u003e• Self-Cooling \u0026amp; Quiet Operation – the pumped liquid cools the motor for long life\u003cbr\u003e• Easy Installation – no control box required to start the pump\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Uses for the MXS Series Pumps\u003c\/b\u003e\u003cbr\u003e• Irrigation\u003cbr\u003e• Shallow Wells\u003cbr\u003e• Rain Collection Tanks\u003cbr\u003e• Cisterns\u003cbr\u003e• Grey Water\u003cbr\u003e• Dewatering\u003cbr\u003e• Fountains\u003cbr\u003e• Pressure Boosting Domestic Water\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages of the MXS Series Submersible Pumps\u003c\/b\u003e\u003cbr\u003e• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.\u003cbr\u003e• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1\/2” capability dwarfs the competition.\u003cbr\u003e• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.\u003cbr\u003e• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.","brand":"Munro","offers":[{"title":"Default Title","offer_id":50419525124376,"sku":"MXS203T22","price":565.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/files\/munro_mxs_sumpersible_pump_1_1_2nd_1.jpg?v=1751354279"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/2257\/4616\/collections\/franklin_c1_series_2nd_jpg.webp?v=1757449852","url":"https:\/\/supremewatersalv.com\/collections\/cistern-bottom-suction-pumps.oembed","provider":"Supreme Water Sales","version":"1.0","type":"link"}